2016 cobra jet mustang ford cj tire wrinkle

2016 Cobra Jet Mustang

by | Nov 5, 2015 | Cool Cars, Newsletter, Restoration

While the Boys @ PalmBeachCustoms Of Florida are Restoring a 1969 R-Code Cobra Jet Mustang

We thought you would appreciate this – Hand Crafted Made In The good ole USA 2016 mustang

Take a look here 

Wonderful First look! Fords New  1,000hp Cobra Jet Mustang 

See the 5.0L Supercharged Coyote Drag vehicle

See the 5.0L Supercharged Coyote Drag vehicle earlier than anyone and learn All of its build secrets!

Not up to 1 / 4-mile mile from the corner of  roads in charter Township, Michigan the historic entrance for the lengthy defunct but iconic Detroit Dragway

 The 2016 Ford Cobra Jet Mustangs are being built with care. Below the watchful eye of the Ford efficiency workforce, long-time Ford provider Watson Engineering performs final meeting earlier than automobiles get shipped around the country for dragstrip responsibility. The Ford Cobra Jet Mustang has matured and evolved in many methods on account that the debut of the brand new generation in 2008, but the 2016 supercharged serpent will likely be more venomous and its marching orders stay the same.

It still has one mission (good enough, perhaps two): win races, at the same time beating the Chevy and Mopar troops and rewrite NHRA stock and tremendous inventory category documents.

If Detroit Dragway was shuttered in late 1996 by regional politics, you would pressure out the door of the Cobra Jet build facility and pull correct onto the track to put down some eight-second occasions in the 2016 Cobra Jet.

And whilst the attractions and sounds of high Fuelers, funny cars, and pro Stockers blasting down the & dirty  are an extended-far-off reminiscence for the getting older local residents, they still recall their heroes and, just as predominant, the brands they cheered on from the rickety picket bleachers. It made experience again then for all of Detroit’s  massive 4 to build drag-race-exact  that still holds genuine in these days, despite the fact right down to the Boys at the Big Three.

To capture the attention of loyal fanatics, while gaining some converts, the automakers go all-out on the SEMA show in Las Vegas each 12 months. A lot of them play up the racing heritage of special nameplates. Even as Fords twin-rapid GT supercar was once on center stage for the period of the 2015 Ford performance SEMA Press convention, we have been extra hypnotized and utterly into the all-new 2016 Cobra Jet. Besides, the supercharged 5.0L V8 sounds higher and makes more vigor than Fords current Ferrari fighter. And like its smooth and sexy GT sibling, the Cobra Jets winning approaches date again to the late-Nineteen Sixties, when it cleaned condominium in super stock at the 1968 NHRA Winter nationals. But we wanted to get a jumpstart on the SEMA expose and go at the back of-the-scenes to discover more on how the 2016 Cobra Jet is brought to existence.

Ford performances Jesse Kershaw, Drag Racing parts and competition manager for the Blue Oval, who’s in the trenches day in and day out. He makes definite the Cobra Jets performance exceeds the customers expectations, whilst giving Ford a voice in terms of stock and super stock rules and classification conferences with the NHRA Tech department.

We knew we desired to disclose the vehicle on the tremendous stage on the 2015 SEMA exhibit, but it was additionally principal to have the auto on monitor for 2016, so we began the build approach before the give away to get the whole lot able in time, said Kershaw.

Like in past models, the new Cobra Jets off as physique-In-White (BIW) cars, but – naked shells after they plucked proper from the Ford Mustang meeting Plant in Flat Rock, Michigan (just down the road from the Cobra Jet construct facility). Ford performance makes use of all creation sheetmetal on the Cobra Jet, making use of a blend of a stamped metal roof, quarters and doors, and aluminum fenders and hood.

Once the BIWs arrive, technicians start assembling the automobiles, and the first part that will get mounted is an eight.50-second certified roll-cage. Other physique shell changes are carried out at this point, corresponding to reducing the trunk ground and spare tire well for wheelie-bar clearance. The ground pans are also modified fairly to receive the seats and mounting facets for 5-point race harnesses. The chassis can also be reinforced to restrict flex and accommodate the relentless punishment of sub-9-2d wheel-standing passes. As soon as these differences have been completed, the Cobra Jet shell heads again to the Flat Rock meeting plant and goes into the paint sales space, in which Oxford White or Deep have an effect on Blue is utilized. Ford efficiency has constrained 25 examples of each and every color for a 50 unit complete build on the 2016 Cobra Jet.

After the painted physique shells return to the Cobra Jet build facility, the assembly approach starts off evolved by way of a series of workstations where technicians hand-assemble an array of manufacturing facility and aftermarket accessories. Speaking of factory ingredients, the 2016 Cobra Jet uses seventy five percent construction add-ons, coming directly off the Ford constituents shelf. Thats plenty of inventory for a Stocker or super stock.

The primary fundamental set up is the whole disc-to-disc strange Engineering 9-inch rear axle with their validated adjustable coil over shocks and comes. An Aeromotive 5-gallon fuel mobile and other related hardware is plumbed so the supercharged snake has a lot of excessive-octane petrol to run more than 150 mph within the quarter. An RJS window web and harness keep the driving force comfortable in case of any mishaps.

Beneath the hood, the 2016 Cobra Jet Mustang packs a blown Coyote 5.0L V8 with a wonderful black Whipple 2.9L supercharger established on top. Basically, the engine is the Ford efficiency Aluminator Crate Engine with moderate mods turning it into the super Cobra Jet (SCJ). The Ford performance engineers work straight with efficiency automobile options, yet another Ford provider thats additionally a subsidiary of Roush. Performance automobile options builds all of the Ford performance Aluminator Crate engines and makes sure the engines participate in proper out of the box.

Earlier than the 2016 Cobra Jet engine received validated, Ford efficiency engineer Ron Ewert and his crew camped out in the dyno  and subjected the 5.0L SCJ development engine to numerous simulated pulls that simulate drag strip burnouts and quarter-mile runs to prove engine durability. The sounds popping out of the lengthy-tube American Racing Headers ought to had been tune throughout the dyno facility.

The engineers also carried out an electrical water pump from the C-MAX Hybrid on the 5.0L SCJ. It’s going to allow fast cool-downs with out the engine walking. This will come in useful when going rounds and scorching lapping the 2016 Cobra Jet on the strip. Ewert also checked out approaches to raised mount the blower belt with the pulleys and idlers and provide extra effectivity and durability. Whipple even took his recommendation and made alterations to its supercharger established on his findings.

Whilst Kershaw didn’t reveal any horsepower or torque numbers, we all know this engine combo is shut, if now not north, of 1,000 hp founded on the efficiency of the 2013 and 2014 Cobra Jets strolling in NHRA factory inventory category. Here, they went head-to-head with the top dog COPO Camaros and Drag Pak Challengers this past season within the manufacturing unit stock Showdown and were effective on many occasions, together with a perfect inventory and manufacturing unit inventory victory at the NHRA U.S. Nationals this earlier September

That bolts to a Coyote V8) with an SFI case. The transmission authorities at Joel on joy (313.581.6266), whose consumer list entails one of the fastest Sportsman racers within the country, construct these models to match the efficiency of the engine. A Hurst shifter with a specified Cobra Jet branded ball manage offers the racer some thing to hold onto when the Mustang includes the front wheels past the 60-foot clocks. And, as soon as once more, the 2016 Cobra Jet will likely be rolling on Cobra Jet, Weld Alumastar wheels (15×3½ entrance, 15×10 rear) and Hoosier entrance runners and 9×30 slicks.

For the period of the Cobra Jet construct method, there comprehensive checklist for every process of the auto, with engineering leads signing off for every section. Once the entire boxes have been checked, there a ultimate signal off and the auto is competent for sale. Don’t  assume to see a car hauler loaded with shiny white and blue Cobra Jet Mustangs rolling down the highway to buyers. Patrons will need to decide upon them up on the build middle, so convey a trailer.

Should you be  capable to jump in and beat up on the competitor within the subsequent lane, the 2016 Cobra Jet Mustang will set you back  again at simply less than six Figures be distinctive. The not obligatory Cobra Jet snap shots will tack on a different $1,995, and if you don’t need to stand it on the back bumper when you put your foot into it, the wheelie bars add a further $1,995 to the bottom line. To take this contemporary snake residence, just stroll into the parts division at your local Ford dealer and order your Beast ..

While the Boys @ PalmBeachCustoms Of Florida are Restoring a 1969 R-CodeCobra Jet Mustang

We thought you would appreciate this – Hand Crafted Made In The good ole USA 2016 mustang

If you like Restoring  old cars Get in touch we Just might Be able to build you one ! 


Submit a Comment

Your email address will not be published. Required fields are marked *

pbc official license



Special Zone Shipping Rates

All RDS body shipments are via ABF Trucking volume rates business-to-business with forklift or loading dock capability. NO RESIDENTIAL OR NON-COMMERCIAL ADDRESS DELIVERIES! All shipments originate in Sanford, FL 32773. No extra crating fees will be charged. Factory pick-up is available at no additional charge.

Rates by State:


  • Zone 1-$390.00
  • FL
  • Zone 2-$710.00
  • AL
  • GA
  • SC
  • TN
  • MS
  • Zone 3-$1300.00
  • AR
  • DC
  • DE
  • IA
  • IL
  • IN
  • KS
  • KY
  • LA
  • MD
  • MI
  • MN
  • MO
  • NC
  • NE
  • NJ
  • OH
  • OK
  • PA
  • VA
  • WI
  • WV
  • Zone 4-$1,500.00
  • CT
  • MA
  • NH
  • NY
  • RI
  • TX
  • VT
  • Zone 5-$2400.00
  • AZ
  • Southern CA, any address Bakersfield and south.
  • CO
  • NM
  • SD
  • WY
  • Zone 6-$2600.00
  • ME
  • Zone 7-$2900.00
  • ND
  • NV
  • UT
  • Zone 8-$3000.00
  • Central & Northern CA, any address north of Bakersfield.
  • ID
  • MT
  • OR
  • WA