Faithful Replacement Steel Body for 1970 Challenger, exclusive at Palm Beach Customs, Florida

developerClassic Car Restoration, Muscle Car Restoration, New Car Builds, Products, RestorationMarch 18, 20180 Comment

classic and muscle car restoration shop in florida

 

Transform your 1970 Challenger Coupe with Palm Beach Customs:

A reliable replacement steel body is all ready to go into your 1970 Challenger Coupe that you’ve always dreamed of.

Officially licensed by MOPAR, this steel body is exclusively available at Palm Beach Customs.

Originally manufactured by Dynacorn Classic Bodies, this Challenger replacement steel body is made available in hardtop form.

Dynacorn 1970 Challenger Coupe Steel Body:

Dynacorn uses 1006 universal-grade automotive steel to manufacture this body shell.

Basically, the cold-rolled sheet steel here is thicker than the original counterparts. That’s to make these bodies stiffer and endurable.

Challenger replacement steel bodyVisit the product page here.

 

In the prototype photos, we can see that the deck lid and doors are hinged and integrated with the body. Know that, it is shipped in the same form.

The weld points are far better as compared to the original body shells. That’s because Dynacorn uses premium quality of welders that go deep and reach weld joints precisely!

Challenger steel body

In no way, you are going to receive an unprimed body shell that is easily corroded.

This ‘70 Challenger Coupe shell body is processed with EDP coating (Electrodeposition Process).

The 1970 Challenger Coupe steel body comes with:

Doors

Deck Lid

These parts are all pre-hung and precisely attached to the body.

Most of the parts here like brackets, braces, deck lid and doors are fully assembled, with minimal body adjustments to be done later.

You know what makes this replacement steel body cool?

Challenger replacement body

You need not worry about any sort of welding or cutting through floor pans.

Moreover, you don’t need to wander around for hours in search of rare replacement parts. In a nutshell, it saves you a lot of time!

The automotive-grade steel undergoes galvanization process to protect it against rust.

Apart from this, Dynacorn steel bodies generally contain high amounts of CO2, so as to reduce road noise and tighten the tolerances.

Challenger steel body

All of these characteristics in Dynacorn replacement bodies is what makes it remarkable in the automobile industry.

So, get this Challenger replacement steel body today exclusively from Palm Beach Customs!


For any further questions, you might have,

visit our:

FAQ Page or Contact Us.

The 1970 Challenger in our Muscle Car Restoration Shop in Florida

JohnProductsMay 20, 20170 Comment

Build your ’70 Dodge Challenger at our muscle car restoration shop in Florida

 

 

The introduction of Dodge Challenger was Chrysler’s response to the muscle car wars started with the Camaros and Mustangs.

 

 

The Second Generation of Challenger that was launched during ’69 – ’70 were meant to compete with the other luxurious muscle cars of the day – albeit a little late to the show.  With a long wheelbase at 110 inch, larger dimension, and luxurious interiors it was a bummer for its rivals.

 

The Challenger was available as a 2 door hardtop coupe or a 2 door convertible. In our store, we offer the 1970 Challenger Coupe Steel Body Replacements.

 

muscle car restoration shop in florida

 

 

The variation of engines ranged from a 198 cu (6 cylinder) to 440 cu (RB V8). In addition, it included Air condition and a Defogger. Over the years the Dodge Challenger sold over a 150,000 cars. In 1971 the Challenger also featured in the movie, Vanishing Point and the series Mannix (1973-74) which elevated its glamor at the top level.

 

classic and muscle car restoration shop in florida

 

 

The car has history participating in the Nationwide NASCAR series and also in other contests like the Trans Am.
If you are still looking to find a steel body or restore your own 1970 Challenger, you are at the right place.

 

Palm Beach Customs is the right choice as your muscle car restoration shop in Florida. We are here to provide you the dream ride right from where you want to begin.

 

Our work can be categorized in the following 3 Areas depending on your needs:
1.  Steel Body – These are for the DIY car hobbyists looking to build from a new steel body. All our Challenger body parts are MOPAR licensed and meets the factory specifications. The chassis packages also available in our store have been made with thick metal and with more weld spots thus providing not only the authenticity but assuring an enhanced quality.

 

2. Original Restoration – We’ve been restoring classic and muscle cars since the 80s so if you have a car that needs a little TLC we’d love to work with you.

 

3. Turn-Key Finished Product – Many do not have the time to build their own cars thus take that burden off you and do all the hard work to provide you full service and satisfaction within a short span of time. Give us the details of your ideas starting from chassis to paint and we will get them in shape for you. The finished product would be delivered right at your doorstep.

 

 

If you liked this post, you might also like to read about the Ford Mustangs in our muscle car restoration shop too!

 

 

classic and muscle car restoration shop in florida

 

 

 

Latest Videos

Recent Posts

1972 Wasque Boat Restoration by Bud Gallup

June 26, 2018

1979 K5 Blazer (Jimmy) Restoration

June 26, 2018

Mustang FastBack Steel Body

1969 Mustang Front-End Rebuild

June 25, 2018

73 bronco restoration srat\\\

1973 Bronco Build – Finishing Stages

June 25, 2018

low-mileage 1968 convertible Camaro restoration

June 14, 2018

428 Cobra Jet Mustang

1969 Cobra Jet Mustang Assembly

May 25, 2018

Get a quote